Santa Fe FWD L4-2.4L (2010)
6. Tighten the PAB mounting bolt.
Tightening torque
: 1.9 - 2.7 kgf.m (18.6 - 26.5 N.m, 13.7 - 19.5 lb.ft)
7. Connect the Passenger Airbag (PAB) harness connector to the SRS main harness connector.
8. Reinstall the glove box.
9. Reconnect the battery negative cable.
10. After installing the Passenger Airbag (PAB), confirm proper system operation:
A. Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
