Santa Fe FWD L4-2.4L (2010)
14. Disconnect the pressure tube (A) and return (B) from the valve body housing.
Tightening torque :
12 - 18 N.m (1.2 - 1.8 kgf.m, 9 - 13 lb-ft)
15. Remove the tube bracket bolts and nut.
16. Remove the steering gear box mount bolt and then pull the steering gear box to the left side.
Tightening torque:
90 - 110 N.m (9 - 11 kgf.m, 65 - 72 lb-ft)
Installation
1. Installation is the reverse of removal.
NOTE:
Be sure to connect between a tube and a hose as shown in the illustration.
2. Add the power steering oil.
3. After installation, bleed the power steering system.
4. Adjust the wheel alignment.
