Santa Fe FWD L4-2.4L (2010)
7. Insert the rack(A) into the rack housing(B) and install the rack bushing(C).
8. Push in the rack stopper (A) until the circlip groove of the rack stopper is aligned with the notched hole of the rack housing. Then, install the
circlip while turning the rack stopper.
CAUTION:
The circlip should not be visible through the notched hole of the rack housing.
9. Using special Tool (09432-21600), install the oil seal and the ball bearing in the valve body (A).
10. After applying the specified fluid and grease to the pinion valve assembly (A), install it in the rack housing assembly.
11. After applying the specified fluid to the oil seal, install it in the rack housing and fix the valve body assembly(A) and O-ring in the gear box(B).
