Santa Fe FWD L4-2.4L (2010)
7. After matching a match mark (C) on the rubber coupling (A) and rear differential companion (B), Install the propeller shaft mounting bolts (D).
Tightening torque :
49.0 - 68.6N.m (5 - 7kgf.m, 36.2 - 50.6lb-ft)
8. Install the wheel speed sensor (A) and the parking brake cable (B) to the rear axle carrier.
Tightening torque :
Wheel speed sensor (A) :
6.9 - 10.8N.m (0.7 - 1.1kgf.m, 5.1 - 8.0lb-ft)
9. Install the brake caliper (B), then tighten the brake caliper mounting bolts (A).
Tightening torque :
63.7 - 73.5N.m (6.5 - 7.5kgf.m, 47.0 - 54.2lb-ft)
10. Support the rear lower arm with a jack as shown in the illustration.
