Steering and Suspension Service: Front Stabilizer Bar Repair
Be careful not to damage to the hub bolts (C) when removing the front wheel and tire (A).
3. Remove the front stabilizer link (A) from the strut assembly.
4. Remove the split pin and front lower arm mounting bolt (B) from the knuckle (A).
5. Remove the under cover (A).
6. Remove the connecting bolt (A) between the steering universal joint assembly and the pinion shaft.
CAUTION:
Keep the neutral-range to prevent the damage of the clock spring inner cable when you handle the steering wheel.
7. Disconnect the EPS connector (B).
8. Remove the front muffler (A).
