Santa Fe FWD L4-2.4L (2010)
8. Install the rear cross member stay (A) and mounting bolt (B) and nut (C).
Tightening torque :
Bolt(B) : 68.6 - 88.3N.m (7 - 9kgf.m, 50.6 - 65.1lb-ft)
Nut(C) : 68.6 - 88.3N.m (7 - 9kgf.m, 50.6 - 65.1lb-ft)
9. After matching a match mark (C) on the rubber coupling (A) and rear differential companion (B), Install the propeller shaft mounting bolts (D).
Tightening torque :
49.0 - 68.6N.m (5 - 7kgf.m, 36.2 - 50.6lb-ft)
10. Install the wheel speed sensor (A) and the parking brake cable (B) to the rear axle carrier.
Tightening torque :
Wheel speed sensor (A) :
6.9 - 10.8N.m (0.7 - 1.1kgf.m, 5.1 - 8.0lb-ft)