Santa Fe FWD L4-2.4L (2010)
CAUTION:
Be careful not to damage to the hub bolts (C) when removing the rear wheel and tire (A).
3. Support the rear lower arm with a jack as shown in the illustration.
4. Remove the rear shock absorber(A).
CAUTION:
If the bush is excessive worn and damaged, replace the shock absorber assembly.
Installation
1. Support the rear lower arm with a jack as shown in the illustration.
2. Install the rear shock absorber (A).
Tightening torque :
Bolt(B) : 137.3 - 156.9N.m (14 - 16kgf.m, 101.3 - 115.7lb-ft)
Nut(C) : 137.3 - 156.9N.m (14 - 16kgf.m, 101.3 - 115.7lb-ft)