Santa Fe FWD L4-2.4L (2010)
31. Tilt the differential assembly and install in the case.
32. Use a scraper to remove the old sealant from both cases.
CAUTION:
Be careful not to allow any sealant inside the case.
33. Apply Permatex Ultra Gray Gasket Sealant or Hyundai sealant, P/N 00232-19039 to the mating surface of the transaxle case.
34. Install a new oil seal in the converter housing and transmission housing.
35. Install the converter case. Install the bolts to the transaxle case and tighten the bolts to specification.
Torque: 31~4O lb-ft (42~54 Nm)