Santa Fe FWD L4-2.4L (2010)
Technical Service Bulletin # 10-01-024-3
Date: 101117
Campaign TB8 - A/T Intermediate Shaft Noise
Group: CAMPAIGN
Number: 10-01-024-3
Date: OCTOBER 2010
Model: 2010 SANTA FE (CM)
Subject
INTERMEDIATE SHAFT NOISE
(Service Campaign TB8)
This bulletin supersedes TSB 10-01-024-2 to replace the 0-ring for 2WD only (Procedure # 1, Step 12):
NOTE:
This TSB provides the following repairs:
^
Modify the intermediate shaft bracket and replace the differential gear 0-ring (PROCEDURE # 1).
^
Replace transaxle and/or intermediate shaft (PROCEDURE # 2)
^
Repair differential (PROCEDURE # 3).
IMPORTANT:
DEALERS MUST PERFORM THIS CAMPAIGN ON ALL AFFECTED VEHICLES IN STOCK AND WHENEVER AN AFFECTED VEHICLE
IS IN THE SHOP FOR ANY MAINTENANCE OR REPAIR.
IMPORTANT:
WHEN A VEHICLE ARRIVES AT THE SERVICE DEPARTMENT, ACCESS HYUNDAI MOTOR AMERICA'S "WARRANTY VEHICLE
INFORMATION" SCREEN VIA WEBDCS TO IDENTIFY OPEN CAMPAIGNS.
DESCRIPTION:
This bulletin provides a procedure that will prevent or repair an intermediate shaft noise condition on 2010 Santa Fe (CM) vehicles built from October
15, 2009 to March 05 2010 that have 2.4L engines with automatic transmissions.
VEHICLES AFFECTED:
Model: 2010MY Santa Fe (CM), 2.4L engine with automatic transaxle.
Production Date Range: Oct. 15, 2009 to March 5, 2010.
