Santa Fe FWD L4-2.4L (2010)
Transmission Temperature Sensor/Switch: Service and Repair
Transaxle Control Module (TCM)
Replacement
NOTE:
In the case of the vehicle equipped with immobilizer or button engine start system, perform "Key Teaching" procedure together .
1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
2. Remove the air cleaner assembly .
3. Remove the TCM connector(A) after removing the TCM(B).
TCM installation bolt:
7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb-ft)
