Santa Fe FWD L4-2.4L (2010)
Axle Shaft: Removal and Replacement
Components and Components Location
Component
Repair Procedures
Removal
1. Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2. Remove the front wheel and tire (A) from the front hub (B).
CAUTION:
Be careful not to damage to the hub bolts (C) when removing the front wheel and tire (A).
3. Remove the split pin (A), then remove castle nut (B) and washer (C) from the front hub under applying the brake.
