Santa Fe FWD L4-2.4L (2010)
Axle Shaft: Overhaul
Front Driveshaft
Inspection
1. Check the driveshaft boots for damage and deterioration.
2. Check the ball joint for wear and damage.
3. Check the splines for wear and damage.
4. Check the dynamic damper for cracks, wear and position.
5. Check the driveshaft for cracks and wears.
Rear Driveshaft
Inspection
1. Check the driveshaft boots for damage and deterioration.
2. Check the ball joint for wear and damage.
3. Check the splines for wear and damage.
4. Check the driveshaft for cracks and wears.
5. If the rear driveshaft is damaged, replace the rear driveshaft assembly.
Disassembly
Disassembly
CAUTION:
-
Do not disassemble the BJ assembly.
-
Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease.
-
The boot band should be replaced with a new one.
1. Remove the circlip (B) from driveshaft splines (A) of the transaxle side PTJ case.