Santa Fe FWD L4-2.4L (2010)
Axle Nut: Specifications
Rear Driveshaft
Torque and Procedure of Castle Nut
Install the washer (C), castle nut (B) and split pin (A) to the rear hub assembly.
Tightening torque.................................................................................................................................196.1 - 255.0 Nm (20 - 26 kgf-m, 144.7 - 188.1 lb-ft)
CAUTION: The washer (B) should be assembled with convex surface outward when installing the castle nut (A) and split pin (C).
