Santa Fe FWD L4-2.4L (2010)
Shifter M/T: Service and Repair
Repair procedures
Removal
1. Remove the console upper cover.
2. Remove the front console assembly.
3. Remove the snap pin (A) and the clips (B).
4. Remove the clip(A) from the shift cable.
5. Remove the shift lever assembly (A).
Tightening torque :
8.8 - 13.7N.m (0.9 - 1.4kgf.m, 6.5 - 10.1Ib-ft)
6. Remove the retainer (A) and the nuts (B).
Tightening torque :
11.8 - 14.7N.m (1.2 - 1.5kgf.m, 8.7 - 10.8Ib-ft)
Installation
1. Installation is the reverse of removal.
2. Move the slide clip (B) of guide member (A) in the direction as shown in the illustration.