Santa Fe FWD V6-2.7L (2007)
m.
Install garnish and trim panel in reverse order of removal procedures
n.
Verify gap is present between garnish and tailgate
5.
Inspect the center console for excessive gaps.
^
Adjust center console by pressing on the top of the panel. Do not replace parts.
NOTE:
If repairs are performed, file a claim under normal warranty procedures.
6.
Fuse cover repair procedure, do not replace parts.
NOTE:
If adjustment or repair is required, use the following procedure.
NOTE:
If repairs are performed, file a claim under normal warranty procedures.
a.
Remove fuse cover
b.
Install additional plastic clips onto the existing clip towers of the fuse cover.