Santa Fe FWD V6-2.7L (2007)
5. Installation is the reverse of removal.
NOTE: Replace any damaged clips.
Rear Pillar Trim Replacement
REAR PILLAR TRIM REPLACEMENT
NOTE:
-
Put on gloves to protect your hands.
-
When prying with a flat-tipped screwdriver, wrap it with protective tape to prevent damaged.
-
Take care not to bend or scratch the trim and panels.
1. Remove the rear seat belt lower anchor.
2. Remove the luggage side trim.
3. Remove the gate pillar trim (A).
4. Installation is the reverse of removal.
NOTE: Replace any damaged clips.