Santa Fe FWD V6-2.7L (2007)
a.
Open the tailgate
b.
Remove the pull strap and four screws securing the trim panel.
WARNING:
Do not remove the access panels. Removing them could result in unnecessary damage.
c.
Release clips from trim panel by pulling down.
d. WARNING: - Start where the side upper trim panel and main trim panel meet then proceed releasing clips around the perimeter until you
reach the opposite side.
e.
Remove trim panel by pushing panel in the direction of the glass (This will allow proper clearance of the rear wiper motor).
f.
Remove the four nuts from inside of tailgate