Santa Fe FWD V6-2.7L (2007)
8. Remove the snap pin (A) and joint pin (B).
9. Disconnect the connectors (A) from the adjustable brake pedal assembly.
10. Remove the mounting nuts (9 each) of the adjustable brake pedal assembly
Tightening torque:
Nuts (A): 12.3 - 18.8 ft. lbs. (16.7 - 25.5 Nm) (1.7 - 2.6 kgf.m)
Nuts (B): 9.4 - 11.6 ft. lbs. (12.7 - 15.7 Nm) (1.3 - 1.6 kgf.m)
Nuts (C): 5.8 - 7.2 ft. lbs. (7.8 - 9.8 Nm) (0.8 - 1.0 kgf.m)
11. Remove the adjustable brake pedal assembly.
12. Install all removed parts in the reverse order of removal.
Caution:
-
Use a new brake snap pin
-
Apply grease to the pin joint before installing the pin
13. Check the brake pedal operation before releasing the vehicle.