Santa Fe FWD V6-2.7L (2007)
4. Pivot the caliper down and tighten the guide rod bolt.
Tightening torque Nm (kgf-m, lb-ft): 21.6-31.4 (2.2-3.2, 15.9-23.1)
INSPECTION
1. Check the brake pads for wear and fade.
2. Check the brake disc for damage and cracks.
3. Check the thickness of the brake disc and run-out using a micrometer and a dial gauge on the part dotted line in the illustration below.
Rear
INSTALLATION
1. Installation is the reverse of removal.
2. Use a SST (09581-11000) when installing the brake caliper assembly.
