hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Brakes - Rear Brake Squeak On Application|Page 8709 > < Brake Caliper|Front|Page 8700
Page 1
background image

Brake Pad: Customer Interest
Brakes - Rear Brake Squeak On Application

Group: BRAKE SYSTEM

Number: 08-BR-002

Date: DECEMBER, 2008

Model: VERACRUZ, AZERA, TIBURON, SANTA FE

Subject: REAR DISC BRAKE PAD REPLACEMENT

SERVICE PROCEDURE

DESCRIPTION:
If a vehicle exhibits a squeaking noise originating from the rear disc brakes when applying the brakes, follow the repair procedure outlined below to
correct this condition.

AFFECTED VEHICLES:

^ Models: Veracruz (EN), Azera (TG), Tiburon (GK), Santa Fe (CM) and Santa Fe (SM) with rear disc brakes.

^ Affected vehicle production date range: From start of production to most current (refer to the parts application table)

PARTS INFORMATION:

SERVICE PROCEDURE:
Confirm the noise is originating from the rear disc brakes. Upon confirmation, replace the rear brake pads with the applicable part number specified in
this bulletin.

Replace the rear disc brake pads by following the procedure outlined in the applicable shop manual and perform the following steps:

Brakes - Rear Brake Squeak On Application|Page 8709 > < Brake Caliper|Front|Page 8700