Santa Fe FWD V6-2.7L (2007)
3) Disconnect the injection connectors(A,B,C), the ground lines(D), the condenser connector(E) and the Ignition coil connectors(F).
4) Disconnect the injection harness connector(A), the No.2 VIS(Variable Induction System) connector(B), the No. 1/No.2 OCV(Oil Control
Valve) connectors(C,D) and the OTS(Oil Temperature Sensor) connector(E).
5) Disconnect the MAP(Manifold Absolute Pressure Sensor) connector(A), the ETC(Electronic Throttle Control) connector(B) and the
PCSV(Purge Control Solenoid Valve) connector(C).