Santa Fe FWD V6-2.7L (2007)
11. Identify pin no.39 and 45 on the U/H-B connector.
12. From the back side of the U/H-B connector identify the wire leading to pin no.39 (gray) and pin no. 45 (blue with a black trace) and cut the wires as
close to the terminal pin as possible.
13. Identify pin no. 6 and 12 on the U/H-D connector.
14. From the back side of the U/H-D connector identify the wire leading to pin no.6 (blue with a black trace) and pin no.12 (gray) and cut the wires as
close to the terminal pin as possible.
15. Remove 1/4" of insulation from the ends of each disconnected wire.