Santa Fe FWD V6-2.7L (2007)
16. Cut the 6 inch heat shrink tube into two 3 inch pieces. Insert one piece of heat shrink tubing (M) over one of the gray wires and one of the blue
wires with a black trace.
17. Insert one gray wire into the 18-22 gauge (red) butt connector and secure the wire using a crimping tool. Insert the second gray wire into the butt
connector and secure the wire using a crimping tool.
18. Repeat on the blue wire with a black trace.
19. Move the heat-shrink tube over the butt connectors and apply heat to the heat-shrink tube evenly.
20. Engage the connector cover (0) with both connectors.
