Santa Fe FWD V6-2.7L (2007)
3. Replace the tensioner and the idler if grease is leaked from bearings.
TIMING BELT
1. Check the belt for oil or dust deposits.
Replace, if necessary.
Small deposits should be wiped away with a dry cloth or paper. Do not clean with solvent.
2. When the engine is overhauled or belt tension adjusted, check the belt carefully. If any of the following flaws are evident, replace the belt.
NOTE:
^
Do not bend, twist or turn the timing belt inside out.
^
Do not allow the timing belt to come into contact with oil, water and steam.
3. Inspect the idler for easy and smooth rotation and check for play or noise.
INSTALLATION
1. Install the crankshaft sprocket.
2. Install the tensioner arm assembly(A) and the idler(B).
3. Install the timing belt auto tensioner.
1) Fixing the tensioner with a vice and compressing the rod, insert a set-pin.
