Santa Fe FWD V6-2.7L (2007)
Tire Pressure Module: Description and Operation
TPMS RECEIVER
DESCRIPTION
RECEIVER
1. Mode
1) Virgin State (No TPMS sensor ID's learned)
^
The receiver as a sole part is shipped in this state. Replacement parts should therefore arrive in this state.
^
In this state, there is no sensor monitoring and no DTC monitoring.
^
The state indicates that platform specific parameters must be written to the receiver and that sensors are un-learned.
^
In unlearned state when connected in the vehicle with ignition key on the TPMS lamp will flash at one second intervals.
2) Normal State
^
In order for tire inflation state and DTC monitoring to occur, the receiver must be in this state.
^
In this state type 1, 2, or 3 sensor learning mode can be started.
2. Overview
^
Receives RF data from sensor.
^
Uses sensor data to decide whether to turn on TREAD Lamp.
^
Uses sensor information, background noise levels, Auto-learn status, short circuit output status, vehicle battery level, internal receiver states to
determine if there is a system or a vehicle fault.