Santa Fe FWD V6-2.7L (2007)
Fuel Filler Neck: Service and Repair
FILLER-NECK ASSEMBLY
REMOVAL
1. Disconnect the fuel filler hose (A) and the leveling tube quick connector (B).
2. Open the fuel filler door and unfasten the filler-neck assembly mounting screws (A).
3. Remove the rear-LH wheel & tire, and the inner wheel house.
4. Remove the bracket mounting nut (A) and remove the filler-neck assembly.
INSTALLATION
1. Install the filler-neck assembly in according to the re- verse order of "REMOVAL" procedure.