Santa Fe FWD V6-2.7L (2007)
3. Enter the appropriate password from the tables above then click OK.
4. The vehicle battery voltage is checked to make sure it is at least 12 volts to ensure reliable update results. Click OK if the results indicate Voltage is
OK.
NOTE:
The vehicle battery voltage is checked to make sure it is at least 12 volts to ensure reliable update results. Click OK if the results indicate Voltage is OK.
5. Upgrade will begin and the progress of the update will appear on the bar graph.
6. Upgrade will occur until 100% is reached on the bar graph. Turn the ignition key OFF for 10 seconds, place it back in the ON position and then click
OK to continue according to Information displayed on the screen.
7. Click OK on the final screen, which indicates update is complete.
8. After update is completed, perform the VIN writing procedure or immobilizer key teaching procedure on the affected vehicles with reference to the "3.
ECM ROM ID INFORMATION" and shop manuals.
9. Check if any incidental Diagnostic Trouble Codes (DTC) have been created by the update and clear the DTC (s) present.
10. Start the engine to confirm proper operation of the vehicle.
