Santa Fe FWD V6-2.7L (2007)
14. Move the shift lever to the "N" position. Attach the shift cable to the lever and install the nut. Tighten the nut to specification.
Specification: 9-10 lb ft. (12-13 Nm, 120-130 kg.cm)
15. Attach the connector.
16. Drive the vehicle two key-on to key-off drive cycles, including shifting to gears D, 3, 2, L (if equipped) and R. If the:
^ DTC does not reset, return the vehicle to the customer.
^ DTC resets, repair or replace the control harness. If the DTC sets again, replace the TCM.
