Santa Fe FWD V6-2.7L (2007)
CAUTION: Be careful not to damage to the hub bolts (C) when removing the front wheel and tire (A).
3. Remove the split pin (A), then remove castle nut (B) and washer (C) from the front hub under applying the brake.
4. Remove the brake caliper mounting bolts (A), and then place the brake caliper assembly (B) with wire.
5. Remove the tie rod end ball joint from the knuckle.
1) Remove the split pin (A).
2) Remove the castle nut (B).
3) Disconnect the ball joint (C) from knuckle (D) using the special tool (09568-4A000).