hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

A/T - Gear Whine At Steady Cruise or Upon Deceleration|Page 7163 > < A/T - Gear Whine At Steady Cruise or Upon Deceleration|Page 7157
Page 1
background image

Vibration Damper: All Technical Service Bulletins
A/T - Gear Whine At Steady Cruise or Upon Deceleration

Group: TRANSAXLE

Number: 07-40-001

Date: JANUARY, 2007 

Model:
2007 SANTA FE

Subject:
2007 SANTA FE AUTOMATIC TRANSAXLE FINAL DRIVE GEAR "WHINE" NOISE

DESCRIPTION:

Some 2007 Santa Fe vehicles with automatic transaxles produced prior to May 25, 2006 may experience a faint gear "whine" noise from the transaxle
when:

^

Driving at a steady speed with light throttle

^

Decelerating at light throttle

This bulletin provides a procedure for installation of a mass damper on the automatic transaxle shift cable to minimize noise that may be transmitted
through the shift cable.

NOTE:

The mass damper was installed on all Santa Fe vehicles beginning with the May 25, 2006 production.

VEHICLES AFFECTED:
^

2007 Santa Fe vehicles with automatic transaxle with 2.7L & 3.3L engine

^

Affected vehicle production range: Produced before May 25, 2006

SERVICE PROCEDURE:

1.

Raise the vehicle on a hoist.

2.

Assemble the mass damper with two bolts as shown. Insert the bolts only two turns.

A/T - Gear Whine At Steady Cruise or Upon Deceleration|Page 7163 > < A/T - Gear Whine At Steady Cruise or Upon Deceleration|Page 7157