Santa Fe FWD V6-2.7L (2007)
6. Remove the shift lever bolts (A-4ea).
7. Remove the shift lever assembly.
INSPECTION
Adjusting method for the control cable
1. Set room side lever and T/M side lever (A) to "N" position.
2. Connect the room side lever and shift cable.
3. Connect the T/M side lever (A) to cable (B) in this following order.
1. Push the cable (B) lightly to "F" direction shown to eliminate FREE PLAY of the cable (B).
2. Tighten the adjusting nut (C).
4. After adjusting the cable (B) according to (2)-(4), check to be sure that this part operates surely at each range of T/M side corresponding to each
position of room lever.
INSTALLATION
1. Install the shift lever bolts (A-4ea).