Santa Fe FWD V6-2.7L (2007)
CAUTION:
^
Possible problems when not following
-
When tightening the bolt completely at a time: the clutch cover can be twisted and vibration can occur
-
On vehicles with self adjusting clutches, it is necessary to follow this caution.
-
Not following tightening torque: There can be bad torque transmission in clutch and relaxation possibility of bolts.
INSPECTION
1. Inspect diaphragm spring wear which is in contact with a concentric slave cylinder bearing.
2. Check the clutch cover and disc surface for wear or crack.
3. Check the clutch disc lining for slipping or oil mark.
4. Measure the depth from a clutch lining surface to a rivet. If the measured value is less than the specification below, replace it.
