Santa Fe FWD V6-2.7L (2007)
2. Remove the hub bearing mounting bolts (B) from the knuckle (A).
3. Remove the hub bearing (C) and the dust cover (B) from the knuckle (A).
CAUTION: Do not disassemble the hub bearing.
INSPECTION
1. Check the hub for cracks and the splines for wear.
2. Check the brake disc for scoring and damage.
3. Check the knuckle for cracks.
4. Check the bearing for cracks or damage.
REASSEMBLY
1. Install the dust cover (B) to the knuckle (A) and then tighten the mounting bolt (C).