Santa Fe FWD V6-3.3L (2009)
T3 : 5 ± 0.5 sec.
*1 ON : IGN1 ON or IGN2 ON
OFF : IGN1 OFF and IGN2 OFF
23. AUTO DOOR LOCK
(1) The function of the AUTO DOOR LOCK shall be operated in case of the AUTO DOOR LOCK is active only.
(2) In case of the vehicle speed set in the state of that IGN1 SW is ON than the standard is maintained for 2 - 3 seconds, perform the LOCK
output. But, if the all DOOR is LOCK state, or all DOOR is FAIL, do not perform the LOCK output.
(3) After the lock output of the (1) item, if any one of all doors is unlocked, the lock signal shall be output at maxim three times. (1s cycle) But,
during the 3-output operating, if the door state is turned to the LOCK from the UNLOCK, disregard it.
(4) After the 3-output operating, if a door is Unlocked, the door equivalent for the UNLOCK state shall be treated as FAIL.
(5) After the door treated as Fail is turned to the LOCK from the UNLOCK, and then if the door is unlocked, the lock signal shall be output once.
(6) After the LOCK output of (2) item, if the locked door is unlocked, the lock signal shall be output once.
(7) But, after the LOCK output, even if the unlock state is maintained, the lock signal shall be output to the door (the unlock state) once.
(8) When the IGN SW is OFF, the door treated as Fail performs the CLEAR function.
(9) The AUTO DOOR LOCK function is not performed in the CRASH UNLOCK condition.
T1 : 2.5 ± 0.5 sec, T2 : 0.5 ± 0.1 sec.
24. 3KM SIGNAL OUTPUT CONTROL
If the vehicle speed is maintained at more than 3km/h for 2 - 3 seconds in the IGN1 ON state, the signal of 3 KM Output-port shall be ON.
T1 : 2.5 ± 0.5 sec.
