Santa Fe FWD V6-3.3L (2009)
3. Loosen the screws, and then remove the steering column upper (A) and lower shrouds (B).
4. Disconnect the connectors (A) from the steering column shaft assembly.
5. Disconnect the ignition switch connector (A) and then remove the steering column assembly by loosening the steering column mounting bolts and
nuts.
Tightening torque :
13 - 18N.m (1.3 - 1.8kgf.m, 9.4 - 13.0lb-ft)
6. Remove the universal joint bolt and then remove the steering column shaft assembly.
7. Remove the relay box(A) with mounting nut(B).
