Santa Fe FWD V6-3.3L (2009)
(10) Remove the ETC bracket.
(11) Disconnect the water hoses from ETC.
(12) Disconnect the PCV hose.
(13) Disconnect the brake vacuum hose.
(14) Remove the surge tank stay (A).
(15) Remove the connector bracket (A) from surge tank.
(16) Remove the surge tank (A).
NOTE:
Cover the inlet of intake manifold with a clean woven stuff or vinyl cover to prevent foreign materials from entering.
10. Remove the cylinder head cover.
(1) Remove the connector bracket (A) from LH cylinder head cover.
(2) Disconnect the RH ignition coil connector (A), condenser connector (B) and remove the wiring bracket (C).
