Santa Fe FWD V6-3.3L (2009)
NOTE:
Be careful not to damage the contact surfaces of cylinder block, cylinder head and timing chain cover.
Before removing the timing chain, mark the RH/LH timing chain with an identification based on the location of the sprocket because the
identification mark on the chain for TDC (Top Dead Center) can be erased.
23. Install a set pin after compressing the timing chain tensioner.
24. Remove the RH cam-to-cam guide (A).
25. Remove the RH timing chain auto tensioner (A) and RH timing chain tensioner arm (B).
26. Remove the RH timing chain.
27. Remove the RH timing chain guide (A).
28. Remove the oil pump chain cover (A).
