Santa Fe FWD V6-3.3L (2009)
11. Install the oil pump chain (B) and oil pump sprocket (A).
Tightening torque :
18.62 - 21.56N.m(1.9 - 2.2kgf.m, 13.74 - 15.91lb-ft)
12. Install the RH timing chain guide (A).
2 of 2
Tightening torque :
19.60 - 24.50N.m(2.0 - 2.5kgf.m, 14.17 - 18.08lb-ft)
13. Install the RH timing chain.
To install the timing chain with no slack between each shaft (cam, crank), follow the procedure below.
Crankshaft sprocket (A) -> Intake camshaft sprocket (B) -> Exhaust camshaft sprocket (C).
The timing mark of each sprocket should be matched with timing mark (color link) of timing chain at installing timing chain.
14. Install the RH timing chain tensioner arm (B).
