Santa Fe FWD V6-3.3L (2009)
9. Remove RH heat protector.
10. Remove RH exhaust manifold.
Installation
1. Install new gasket and exhaust manifold.
Tightening torque
39.2 - 44.1Nm(4.0 - 4.5kgf.m, 28.92 - 32.53lb-ft)
2. Install heat protector.
Tightening torque
16.66 - 21.56Nm(1.7 - 2.2kgf.m, 12.30 - 15.91lb-ft)
3. Install front muffler.
Tightening torque
39.2 - 58.8N.m(4.0 - 6.0kgf.m, 28.92 - 43.37lb-ft)
4. Connect oxygen sensor connector.
5. Install the radiator assembly.
6. Install under cover.
