Santa Fe FWD V6-3.3L (2009)
2. Using a T40 Torx tool, remove the two mounting bolts located at the side of the steering wheel.
Tightening Torque for Mounting Bolts:
0.8 ~ 1.1 kgf.m (7.9 ~ 10.8 Nm; 5.8 ~ 8.0 lb.ft)
3. Disconnect the horn connector and the two Driver's Air Bag Module connectors. Remove the Driver's Air Bag Module.
CAUTION:
The removed air bag module should be stored in a clean, dry place with the pad cover facing up.
4. Remove the clock spring harness connector and the steering wheel lock nut.
NOTE:
Mark the steering wheel and shaft before removal to aid during reinstallation.
Tightening Torque for The Lock Nut::
40 - 50 Nm (4.0 ~ 5.0 kgf.m; 29 ~ 36 lb.ft)
