Santa Fe FWD V6-3.3L (2009)
Connector Inspection Procedure
1. Handling of Connector
A. Never pull on the wiring harness when disconnecting connectors.
B. When removing the connector with a lock, press or pull locking lever.
C. Listen for a click when locking connectors. This sound indicates that they are securely locked.
D. When a tester is used to check for continuity, or to measure voltage, always insert tester probe from wire harness side.
E. Check waterproof connector terminals from the connector side. Waterproof connectors cannot be accessed from harness side.
NOTE:
-
Use a fine wire to prevent damage to the terminal.
-
Do not damage the terminal when inserting the tester lead.
