Santa Fe FWD V6-3.3L (2009)
14. Remove the stabilizer bar.
Installation
1. Install the bushing (B) on the stabilizer bar (A).
NOTE:
Bring clamp (C) of stabilizer bar (A) into contact with bushing (B).
2. Install the bracket on the bushing (B).
3. Install the stabilizer bar to the sub frame.
4. Install the stabilizer bar bracket (A) mounting bolts (B).
Tightening torque :
Bolt(B) : 49.0 - 63.7N.m (5.0 - 6.5kgf.m, 36.2 - 47.0lb-ft)
5. Install the sub frame (A) by supporting it with a jack.
6. Install the sub frame stay mounting bolts(A), nuts(B) and the sub frame mounting bolts(C).
Tightening torque :
Bolt(A) : 68.6 - 88.3N.m (7.0 - 9.0kgf.m, 50.6 - 65.1lb-ft)
Nut(B) : 68.6 - 88.3N.m (7.0 - 9.0kgf.m, 50.6 - 65.1lb-ft)
Bolt(C) : 137.3 - 156.9N.m (14 - 16kgf.m, 101.3 - 115.7lb-ft)