Santa Fe FWD V6-3.3L (2009)
11. Install the brake caliper (B), then tighten the brake caliper mounting bolts (A).
Tightening torque :
63.7 - 73.5N.m (6.5 - 7.5kgf.m, 47.0 - 54.2lb-ft)
12. Support the rear lower arm with a jack as shown in the illustration.
13. Install the rear shock absorber (A).
Tightening torque :
Bolt(B) : 137.3 - 156.9N.m (14 - 16kgf.m, 101.3 - 115.7lb-ft)
Nut(C) : 98.1 - 117.7N.m (10.0 - 12.0kgf.m, 72.3 - 86.8lb-ft)
NOTE:
After checking the distance(465±10mm(18.31±0.39in)) between the wheel housing garnish (A) and the hub assembly (B) as shown in the
illustration, tighten the mounting bolts and nuts of rear chassis part with specified torque.
14. Install the wheel and tire (A) to the rear hub (B).
Tightening torque :
88.3 - 107.9N.m (9 - 11kgf.m, 65.1 - 79.6lb-ft)