Santa Fe FWD V6-3.3L (2009)
NOTE:
After checking the distance(465±10mm(18.31±0.39in)) between the wheel housing garnish (A) and the hub assembly (B) as shown in the
illustration, tighten the mounting bolts and nuts of rear chassis part with specified torque.
3. Install the wheel and tire (A) to the rear hub (B).
Tightening torque :
88.3 - 107.9N.m (9 - 11kgf.m, 65.1 - 79.6lb-ft)
CAUTION:
Be careful not to damage the hub bolts (C) when installing the rear wheel and tire (A).
Shock Absorbers
Component
