Santa Fe GLS V6-2.7L (2002)
Remove the starter from the mounting area and push it aside to gain better access to the CKP sensor.
7.
Remove the CKP mounting bolt (10 mm socket).
8.
Disconnect the CKP sensor connector and replace the CKP sensor with the new part.
9.
Reinstall all removed components in reverse order and lower the vehicle.
10.
Reconnect the battery negative cable and reset all radio preset stations and the clock.
11.
Start the engine to check for proper operation.
CAMPAIGN CLAIM INFORMATION
NOTE:
Submit claims using the Campaign Claim Screen.