Santa Fe GLS V6-2.7L (2002)
1. To remove the windshield, first remove the following parts
1. Front pillar trim
2. Inside rear view mirror
3. Wiper arms
4. Cowl top cover
5. Windshield glass molding
2. Use the special tool (09861 - 31100) to cut through the sealant.
3. Make mating marks on the glass and body if the glass is to be reinstalled.
4. Take out the windshield glass with the special tool(09861 - 31400).
INSTALLATION
1. Using a knife or the special tool(09861 - 31200), cut the old sealant smoothly to a thickness of about 2 mm (0.08 in.) on the bonding surface
around the entire windshield flange.