Scoupe L4-1468cc 1.5L SOHC (8 VALVE) (1991)
/Page-2128001.png)
Mirrors: Technical Service Bulletins
External Mirror - Replacement Procedure
Group: TRIM
Number: 94-80-008
Date: SEPTEMBER, 1994
Model: ALL MODELS
Subject:
REPLACEMENT PROCEDURE OF OUTSIDE MIRROR BASE PLATE
DESCRIPTION
If the paint on the outside mirror base plate peels, the base plate should be replaced to ensure proper paint adhesion. This service bulletin outlines the
replacement procedure for the outside mirror base plate.
The procedure applies to Excel, Scoupe and Elantra vehicles. Sonata mirror disassembly instructions are included for reference, should the mirror
housing need to be separated for painting.
SERVICE PARTS INFORMATION
CAUTIONS IN SERVICING THE OUTSIDE MIRROR
^
Work on a soft cloth to prevent scratching or damaging the outside mirror.
Be careful not to scratch the paint on the outside mirror housing or the base plate when performing the replacement procedures.
^
Use only manual tools for the disassembly and reassembly.
^
When removing the last of the 4 or 5 screws securing the mounting bracket, care should be taken to ensure that the bracket is held. This will prevent
it from springing back and injuring the hand.
^
Clean the mirror surface after reassembly has been completed.
^
This procedure must be properly followed to prevent mirror vibration, noise, or water leaks.
WARRANTY INFORMATION
