Scoupe L4-1468cc 1.5L SOHC (8 VALVE) (1991)
3.
Remove the rear seat back latch mounting screws.
4.
Disconnect the rear seat back latch and rod.
5.
Replace the rear seat back latch with the new one.
6.
Installation is the reverse order of the removal.
7.
After installing the rear seat back latch, make sure the rear seat back knob is tight and secure.
8.
Check the height of the rear seat back dampers. Dampers number 1 and 4 should be longer than dampers 2 and 3, as shown. Both dampers must
touch the rear package tray support at the same time. The dampers should compress slightly when closing the rear seat. Proper damper heights will
also help reduce noise and/or squeaks of the rear seat backs.
IMPORTANT:
When the rear seat back is returned to its upright position, make sure it has locked into position by pulling and pushing on the top of the seat.
PARTS INFORMATION
Part Name
Side
Old
New
Rear Seat Back
LH
89231-24000
89231-24100
Latch Assembly
RH
89232-24000
89232-24100
WARRANTY INFORMATION
Causal
Model
Op Code
Op Code Description
Time
Part
Model
Year
Codes
Rear Seat Back
See
N29
89231R00
Latch Assy (one side) - RE
0.2
Above
SLC
'91
C29