Scoupe L4-1468cc 1.5L SOHC (8 VALVE) (1991)
4.
Using a small screwdriver, remove the bulb socket including the bulb from the switch housing.
5.
Remove the burned out bulb and insert a new bulb into the bulb socket of the switch assembly.
6.
Re-install the switch into the facia panel. Re-connect and verify that the bulb is operational.
7.
Re-install the center facia panel.
SONATA
8.
Remove the switch plate assembly or the center facia panel.
9.
Disconnect the connector of the switch with the burned out bulb from the wire harness.
10.
Remove the switch assembly from the switch plate or center facia panel.
11.
Using a small screwdriver, remove the bulb socket including the bulb from the switch housing.