hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Crank Angle and #1 TDC (CYL. Detect Sig.) Sensors|Page 1909 > < Crank Angle and #1 TDC (CYL. Detect Sig.) Sensors|Page 1907
Page 1
background image

Distributor: Service and Repair

Ignition System Components Exploded View

REMOVAL:
1.  Disconnect the battery ground cable.
2.  Remove the two distributor cap retaining clips and move the cap to the one side.
3.  Disconnect the lead wire connector.
4.  Remove the distributor mounting nut and remove the distributor assembly.

Distributor Components Exploded View

DISASSEMBLY:
1.  Lightly clamp the distributor in a vise equipped with soft jaws.
2.  Pull off the rotor from the rotor shaft.
3.  Remove the packing rubber.
4.  Lift off the cover.

Crank Angle and #1 TDC (CYL. Detect Sig.) Sensors|Page 1909 > < Crank Angle and #1 TDC (CYL. Detect Sig.) Sensors|Page 1907